How To Disassemble a Ball Valve?

The prosperity of the valve market has been flawlessly shown in many areas of modern industry. Ball valve, as a significant member of the significant valve household, has been making great contributions to several industrial processes. Such mechanisms are specialized to control fluids under high pressure or high temperature.

It’s clear that such mechanics occupy a wonderful number of advantages. By way of instance, a Solenoid Valve 2 / 2way (which is also known as “ โซลินอยด์วาล์ว 2/2way” in the Thai language  ) is simple and economical to install and has a very long service life. Concerning general applications, they ought to be designed with the higher degree of management and ability to be disassembled and repaired when issues arise.

Referring to the disassembly, it’s moderately easy with some basic tools. This procedure requires the doer to run according to the directions. And the essential tools are simply accessed. They may be an adjustable wrench set, safety gloves, and safety glasses. Be cautious on the whole procedure.

Firstly, it needs to be ensured that the principal supply was shut off until the very start. Verify the temperature and pressure inside is secure for disassembly. The attached temperature and pressure indicators can give us help.

Secondly, it’s time to remove the ball valve from the connecting pipes. Take the removing work side by side. Afterwards, put the whole ball valve on a level area, aiming to give enough space for the subsequent work.

Thirdly, it’s time to disassemble the ball valve itself. The correct sequence can be achieved by removing the hex jam nut on the surface of the valve. In sequence, move from the spring washer, the valve control handle as well as the hex nuts holding the body end plate to the peak of the valve assembly.

Leave a Reply

Your email address will not be published. Required fields are marked *